Better Choice, Better Experience.
The AmeriTop Motion Sensor Lights Outdoor with the three heads design, output 39W, 3500 Lumens, 6000K high brightness output and good heat dissipation.
ETL-Certification for outstanding quality standards provide efficient lighting and adds extra safety for your house.
3 Modes Available: Test Mode, Auto Mode, Permanent On.
TEST MODE (Work for both day and night)
Set-up: Move to the TEST MODE
Function: To test the light before using it for the first time or after maintenance. Auto ON when motion is detected and auto-off after lighting up for 6 seconds, if no further motion is detected.
AUTO MODE (Dusk to dawn)
Set-up: Move to the 30S/60S/120S Position
Function: Only work at night. Auto ON for pre-determined time(30S/60S/120S) when people or other living objects are detected within the sensing area, and Auto OFF after no further motion is detected.
Permanent On (Work for both day and night)
Ensure the power to the light is on and the sensor has warmed up for 1 minute.
To turn manual override on, switch the power OFF-ON-OFF-ON at the wall switch within 6 seconds.
To turn manual override off or revert back to motion sensor mode, switch the power OFF-ON-OFF-ON within 6 seconds. Or cut off power for 10 seconds.
SENSITIVITY SETTING:
L: Up to 6M or 20FT
M: Up to 10M or 33 FT
H: Up to 15M or 49FT
Specifications:
Wattage: 39W
Voltage: AC 120V (100V – 130V)
NOTE:
Make sure there is no other infrared or ambient light around, under or point to the motion sensor light
Recommended Install Height: 6.5-8.25 feet above the ground.
Package Includes:
1x LED Motion Sensor Light
1x Crossbar
2x Machine screws
1x Ring
1x Nut
3x Wire Nuts
1x EVA Gasket
Reviews
There are no reviews yet.